HP Indigo WS6600 Working with Indigo ElectroInk SilverHow-to Guide - Page 8

Preventing eye irritation, Bypasses > Processes

Get HP Indigo WS6600 PDF manuals and user guides View all HP Indigo WS6600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

● Continuous color calibration (CCC) does not support ElectroInk Silver. It is not recommended to use CCC with silver jobs. If you decide to work with CCC make sure that the Auto-Null adding on double-hit printing bypass is selected in the Print Care (CE level) > Bypasses > Processes screen (see figure above). ● When working with uncoated matte substrates (for example - wine label substrates) do not perform color calibration. Perform troubleshooting if issues exist (for example: image memory, flow streaks etc) - refer to Silver color appearance and adjustments on page 11. ● For improved edge accuracy when working with ElectroInk Silver, activate the line thinning and enable gray level text enhancement from the job properties. ● If the press will be shut down for long periods (such as for weekends), use the OFIR before the shutdown. Preventing eye irritation Inks and imaging oil might irritate the skin and eyes. In extreme cases of exposure, these substances might cause blindness. As a precaution: ● Wear protective eye covering. ● Install eye wash stations within 7.6 m (25 ft) of areas where the ink and imaging oil are handled, dispensed, or stored. ● Provide eye wash liquid at the eye wash stations (available from most safety supply companies) to comply with ANSI standard Z358.1-1990. 4 Chapter 1 Overview

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
●
Continuous color calibration (CCC) does not support ElectroInk Silver. It is not recommended to
use CCC with silver jobs. If you decide to work with CCC make sure that the
Auto-Null adding on
double-hit printing
bypass is selected in the Print Care (CE level) >
Bypasses > Processes
screen
(see figure above).
●
When working with uncoated matte substrates (for example - wine label substrates) do not perform
color calibration. Perform troubleshooting if issues exist (for example: image memory, flow streaks
etc) - refer to
Silver color appearance and adjustments
on page
11
.
●
For improved edge accuracy when working with ElectroInk Silver, activate the line thinning and
enable gray level text enhancement from the job properties.
●
If the press will be shut down for long periods (such as for weekends), use the OFIR before the
shutdown.
Preventing eye irritation
Inks and imaging oil might irritate the skin and eyes. In extreme cases of exposure, these substances
might cause blindness.
As a precaution:
●
Wear protective eye covering.
●
Install eye wash stations within 7.6 m (25 ft) of areas where the ink and imaging oil are handled,
dispensed, or stored.
●
Provide eye wash liquid at the eye wash stations (available from most safety supply companies) to
comply with ANSI standard Z358.1-1990.
4
Chapter 1
Overview