HP LD4200tm HP LD4200tm LCD Monitor User Guide - Page 76
Input Select (Command : x b), IR Codes, Remote Control IR Code, Output Wave
View all HP LD4200tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
37. Input Select (Command : x b) To select input source for the Set. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 20H : AV 40H : Component 1 41H : Component 2 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) Acknowledgement [b][ ][Set ID][ ][OK][Data][x] Data 20H : AV 40H : Component 1 41H : Component 2 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) IR Codes Use this method to connect your wired remote control port on the monitor. Remote Control IR Code Output Wave ● Single pulse, modulated with 37.9KHz signal at 455kHz ● Carrier Frequency ◦ FCAR = 1/Tc=fosc/12 ◦ Duty Ratio = T1/Tc = 1/3 68 Appendix C Controlling the Multiple Product ENWW
37. Input Select (Command : x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV
40H : Component 1
41H : Component 2
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 20H : AV
40H : Component 1
41H : Component 2
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
IR Codes
Use this method to connect your wired remote control port on the monitor.
Remote Control IR Code
Output Wave
●
Single pulse, modulated with 37.9KHz signal at 455kHz
●
Carrier Frequency
◦
FCAR = 1/Tc=fosc/12
◦
Duty Ratio = T1/Tc = 1/3
68
Appendix C
Controlling the Multiple Product
ENWW