HP LH4r HP Netserver LP 2000r User Guide - Page 17
Replacing the Top Cover
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2 Opening and Closing the HP Netserver Replacing the Top Cover To replace the cover, follow these steps. 1. Ensure the knob on the cover is turned to the Open position (clockwise). See Figure 2-3. 2. Place the rear edge of the top cover near the rear edge of the chassis, angling the cover slightly to engage the hooks at the rear of the chassis. Then lay the cover down on the chassis. Figure 2-3. Replacing the Cover 3. Turn the knob to the Closed position (counter-clockwise). See Figure 2-3. 4. Slide the Netserver back into the rack. 11
Chapter 2
Opening and Closing the HP Netserver
11
Replacing the Top Cover
To replace the cover, follow these steps.
1.
Ensure the knob on the cover is turned to the Open position (clockwise).
See Figure 2-3.
2.
Place the rear edge of the top cover near the rear edge of the chassis,
angling the cover slightly to engage the hooks at the rear of the chassis.
Then lay the cover down on the chassis.
Figure 2-3. Replacing the Cover
3.
Turn the knob to the Closed position (counter-clockwise). See Figure 2-3.
4.
Slide the Netserver back into the rack.