HP LH4r HP Netserver LP 2000r User Guide - Page 37
Refer to Removing the Air Flow Guide in Opening
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 4 Installing Additional Memory 5. Remove the air flow guide. See Figure 4-1. Refer to "Removing the Air Flow Guide" in Chapter 2, "Opening and Closing the HP Netserver." Figure 4-1. Removing the Air Flow Guide 6. Locate the DIMM slots on the system board, and choose an empty slot to install a DIMM. See Figure 4-2. DIMMs may be installed in any combination, in any slot, but HP recommends starting at slot 0 and filling the slots in order, with the largest size first. CAUTION Use only HP PC133 (133 MHz) SDRAM DIMMs. 31
Chapter 4
Installing Additional Memory
31
5.
Remove the air flow guide. See Figure 4-1.
Refer to "Removing the Air Flow Guide" in Chapter 2, "Opening and
Closing the HP Netserver."
Figure 4-1. Removing the Air Flow Guide
6.
Locate the DIMM slots on the system board, and choose an empty slot to
install a DIMM.
See Figure 4-2.
DIMMs may be installed in any combination, in any slot, but HP
recommends starting at slot 0 and filling the slots in order, with the largest
size first.
CAUTION
Use only HP PC133 (133 MHz) SDRAM DIMMs.