HP LH4r HP Netserver LP 2000r User Guide - Page 99
Press <Ctrl C> to start Symbios Configuration
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 10 Configuring the HP Netserver To access the Symbios SCSI Configuration Utility, refer to the following instructions. 1. Reboot the HP Netserver. If you are already in the boot process, you should see the following message appear. Press to start Symbios Configuration Utility... 2. Press + keys to enter the utility. 3. Use the arrow keys to move the cursor, press Enter to select an option, and press Esc to exit. 4. To change adapter settings: ◊ Select an adapter from the list in the main menu. ◊ Select Adapter Setup. This option configures the SCSI ID setting and other advanced adapter settings. 5. To format a hard disk or change hard disk parameters: ◊ Select an adapter from the list in the main menu. ◊ Select Device Selections. ◊ Select the hard disk to format. ◊ Select Format menu option. CAUTION Low-level formatting of a SCSI disk drive will destroy all of its data. 93