HP LH4r HP Netserver LP 2000r User Guide - Page 38
Always use an anti-static wrist strap and a grounding mat.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 4 Installing Additional Memory 0 1 DIMM 2 Slots 3 System Board (top view) Figure 4-2. DIMM Locations on System Board 7. Spread the two retaining latches on the slot outward. See Figure 4-3. 8. Remove a DIMM from its container, handling the module by its edges. CAUTION • Leave the memory module in the anti-static container until you are ready to install it. • Always use an anti-static wrist strap and a grounding mat. • Before removing a DIMM from the anti-static container, touch a grounded, unpainted metal surface to discharge static electricity. 32
Chapter 4
Installing Additional Memory
32
System Board (top view)
DIMM
Slots
0
1
2
3
Figure 4-2. DIMM Locations on System Board
7.
Spread the two retaining latches on the slot outward. See Figure 4-3.
8.
Remove a DIMM from its container, handling the module by its edges.
CAUTION
•
Leave the memory module in the anti-static container until
you are ready to install it.
•
Always use an anti-static wrist strap and a grounding mat.
•
Before removing a DIMM from the anti-static container,
touch a grounded, unpainted metal surface to discharge
static electricity.