HP LH4r HP Netserver LP 2000r User Guide - Page 84
Installing a Power Supply Module
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 9 Connecting the Monitor, Keyboard, Mouse, and UPS Installing a Power Supply Module The HP Netserver LP 2000r comes with one power supply module. A second power supply module for redundancy is optional. If only one power supply module is used, it must be installed in power supply bay 2, and a power supply filler panel must be installed in the empty bay 1. Each power supply has its own power cord (see Figure 9-2). CAUTION Operating the HP Netserver without a power supply filler panel in an empty power supply bay could cause excessive EMI or thermal damage to the Netserver. Power Supply Bay #1 AC for Power Supply Bay #1 AC for Power Supply Bay #2 Power Supply Bay #2 Figure 9-2. Power Supply Connectors 1. Remove the power supply filler panel from the empty power supply bay: a. Pinch the release lever on the filler panel and pull the lever down. b. Slide the filler panel out of the power bay. See Figure 9-3. Save the power supply filler panel for future use. The filler panel must be used in the empty power supply bay whenever you operate the HP Netserver with a single power supply module. 78