HP LH4r HP Netserver Service Handbook, Volume 2 - Mid - Page 167

Hot Swap Subsystem SCSI Address Settings Switches 3, 4, and 6 determine the SCSI address setting for each shelf in the hot swap subsystem. The following table describes the settings and the resulting shelf SCSI address. NOTE For information on changing the SCSI address setting on the CD-ROM drive, see the Technical Information Label on the CD-ROM drive. Upper Cage Switch Settings SCSI Address 3 - Off 4 - Off 6 - Off 3 - Off 4 - On 6 - Off 3 - On 4 - Off 6 - Off 3 - On 4 - On 6 - Off Shelf 1 = ID 1 Shelf 2 = ID 2 Shelf 3 = ID 3 Shelf 1 = ID 1 Shelf 2 = ID 0 Shelf 3 = ID 3 Shelf 1 = ID 9 Shelf 2 = ID 10 Shelf 3 = ID 11 Shelf 1 = ID 9 Shelf 2 = ID 8 Shelf 3 = ID 11 Lower Cage Switch Settings SCSI Address 3 - Off 4 - Off 6 - On 3 - Off 4 - On 6 - On 3 - On 4 - Off 6 - On 3 - On 4 - On 6 - On Shelf 4 = ID 4 Shelf 5 = ID 5 Shelf 6 = ID 6 Shelf 4 = ID 4 Shelf 5 = ID 0 Shelf 6 = ID 6 Shelf 4 = ID 12 Shelf 5 = ID 13 Shelf 6 = ID 14 Shelf 4 = ID 12 Shelf 5 = ID 8 Shelf 6 = ID 14 Specifications Power Supply Power Availability Power Consumption System Dimensions System Weight Operating Temperature Operating Humidity Auto-ranging 90 to 135 VAC, or 180 to 265 VAC at 50-60Hz 470W continuous, 530W peak 723W maximum with 110/220V supply 815W peak with 110/220V supply 19.3 in. high x 13.7 in wide x 18.1 in deep (49 cm high x 34.8 cm wide x 46 cm deep) 50-70 lbs (22.7-31.8 kg), depending on configuration 41 to 95 degrees F (5 to 35 degrees C) 20% to 80% non-condensing 159