HP LH4r HP Netserver Service Handbook, Volume 2 - Mid - Page 98
Power Consumption
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Hot Swap Subsystem SCSI Address Settings Switches 4 and 6 determine the SCSI address setting for each shelf in the hot swap subsystem. The following table describes the settings and the resulting shelf SCSI address. NOTE For information on changing the SCSI address setting on the CD-ROM drive, see the Technical Information Label on the CD-ROM drive. Upper Cage Switch Settings SCSI Address 3 - Off 4 - Off 6 - Off 3 - Off 4 - On 6 - Off Shelf 1 = ID 1 Shelf 2 = ID 2 Shelf 3 = ID 3 Shelf 1 = ID 1 Shelf 2 = ID 0 Shelf 3 = ID 3 Lower Cage Switch SCSI Address Settings 3 - Off 4 - Off 6 - On 3 - Off 4 - On 6 - On Shelf 4 = ID 4 Shelf 5 = ID 5 Shelf 6 = ID 6 Shelf 4 = ID 4 Shelf 5 = ID 0 Shelf 6 = ID 6 Specifications Power Supply Power Availability Power Consumption System Dimensions System Weight Operating Temperature Operating Humidity BTUs Auto-ranging 90 to 132 VAC, or 180 to 264 VAC at 47-63Hz LH/LH Plus 350W continuous, 386W peak LH Pro 450W continuous LH/LH Plus: 499/479W maximum with 110/220V supply 551/528W peak with 110/220V supply LH Pro: 650/600 maximum with 110/220V 19.3 in. high x 13.7 in wide x 18.1 in deep (49 cm high x 34.8 cm wide x 46 cm deep) 50-70 lbs (22.7-31.8 kg), depending on configuration 41 to 95 degrees F (5 to 35 degrees C) 20% to 80% non-condensing LH/LH Plus: less than 1700 BTUs (430 Kcal) LH Pro: less than 2200 BTUs (560 KCal) 90