HP LH4r HP Netserver Service Handbook, Volume 2 - Mid - Page 60
Power Supply, Power Availability, Power Consumption, System Dimensions, System Weight, Operating
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2. Make a backup copy of your current CONFIG.SYS file by entering; COPY CONFIG.SYS CONFIG.BAK 3. Copy the SET640K.SYS file from NetServer #2 diskette to NetServer #1 diskette by entering; COPY B:SET640K.SYS A:\ (If you do not have a second flexible disk drive, DOS treats drive A as both drive A and drive B and prompts you to insert disks.) 4. Using the editor of your choice, modify the CONFIG.SYS file so that SET640K.SYS file is the first file on line 1, as shown above. 5. Save the file when you are done editing. When you next boot from the NetServer #1 diskette, if the base memory size is 512K you are prompted to press Enter when the banner appears. If the base memory size is set to 640K, the utility displays only the driver banner with no prompt. The function of this driver does not change the base memory size setting selected in the EISA configuration Utility. Specifications Power Supply Power Availability Power Consumption System Dimensions System Weight Operating Temperature Operating Humidity Auto ranging: 90 to 132 VAC, or 198 to 264 VAC at 47-63Hz 227W continuous, 245W peak 376/354W maximum with 110/220V supply 405/382W peak with 110/220V supply 18.5 in. high x 10.2 in wide x 16.5 in deep (47 cm high x 26 cm wide x 42 cm deep) 25 lbs (11.3 kg), depending on configuration 41 to 104 degrees F (5 to 40 degrees C) 15% to 80% non-condensing 52