HP OMEN 15.6 Maintenance and Service Guide - Page 44

Memory modules

Get HP OMEN 15.6 PDF manuals and user guides View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion. Memory modules To remove the memory modules, use this procedure and illustration. Table 5-3 Memory module descriptions and part numbers Description 8 GB, DDR4-3200 4 GB, DDR4-3200 Spare part number L46598-001 L83673-001 Before removing a memory module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drive to the left of the battery (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). If you are replacing a memory module, remove the existing memory module: ▲ Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then remove the module (2). Use the same procedure to remove all memory modules. IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. 34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-3
Memory module descriptions and part numbers
Description
Spare part number
8 GB, DDR4-3200
L46598-001
4 GB, DDR4-3200
L83673-001
Before removing a memory module, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (
Bottom cover
on page
31
).
3.
Remove the solid-state drive to the left of the battery (
Solid-state drive
on page
32
).
4.
Remove the battery (see
Battery
on page
37
).
If you are replacing a memory module, remove the existing memory module:
▲
Spread the two retention clips outward
(1)
until the memory module tilts up at a 45° angle, and then
remove the module
(2)
. Use the same procedure to remove all memory modules.
IMPORTANT:
To prevent damage to the memory module, hold the memory module by the edges only.
Do not touch the components on the memory module.
34
Chapter 5
Removal and replacement procedures for Customer Self-Repair parts