HP OMEN 15.6 Maintenance and Service Guide - Page 64
to release it., and the inside edges of the left and right sides of the bezel
View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. Open the computer until the display is at approximately 45° (2), and then close the computer (3). This step opens the hinges. 5. While pulling the display cable (1) and WLAN antenna cables (1) through the holes in the computer, pull display away from computer (2). 6. If you need to replace display assembly subcomponents: a. Flex the top (1) and the inside edges of the left and right sides of the bezel (2) to release it. b. Slide a flat tool (3) across the inside of the bottom of the bezel to release it (4), and then remove the bezel from the display (5). The bezel is available as spare part number M00633-001. Bezel adhesive is available as spare part number L98957-001. 54 Chapter 6 Removal and replacement procedures for authorized service provider parts