HP OMEN 15.6 Maintenance and Service Guide - Page 49
Speakers, Remove the Phillips M2.0 × 5.0 screw
View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drive to the left of the battery (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). Remove the power connector cable: 1. Diconnect the cable from the system board (1), and then remove the cable from the routing along the fan (2). 2. Remove the Phillips M2.0 × 5.0 screw (3) that secures the power connector cable to the computer. 3. Remove the bracket from the power connector (4), and then remove the power connector cable from the computer (5). Reverse this procedure to install the power connector cable. Speakers To remove the speakers, use this procedure and illustration. Table 6-3 Speaker description and part number Description Speaker Kit Spare part number L98748-001 Before removing the speakers, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). Component replacement procedures 39