HP OMEN 15.6 Maintenance and Service Guide - Page 48
Power connector cable, Phillips M2.0 × 5.0 screw
View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drive to the left of the battery (Solid-state drive on page 32). WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. IMPORTANT: Removing a user-replaceable battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work or shut down the computer through Windows before you remove the battery. Remove the battery: 1. Doisconnect the battery cable from the system board (1). 2. Remove the five Phillips M2.0 × 5.0 screw (2) that secure the battery to the computer. 3. Remove the battery from the computer (3). To insert the battery, reverse the removal procedures. Power connector cable To remove the power connector cable, use this procedure and illustration. Table 6-2 Power connector cable description and part number Description Power connector cable Before removing the power connector cable, follow these steps: Spare part number L98734-001 38 Chapter 6 Removal and replacement procedures for authorized service provider parts