HP OMEN 15.6 Maintenance and Service Guide - Page 45
To protect a memory module after removal, place it in an electrostatic-safe container.
View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
To protect a memory module after removal, place it in an electrostatic-safe container. To install a memory module: 1. Align the notched edge of the module with the tab in the slot (1), and then press the module into the slot at an angle until it is seated (2). 2. Press down on the module until the side retention clips snap into place (3). Component replacement procedures 35
To protect a memory module after removal, place it in an electrostatic-safe container.
To install a memory module:
1.
Align the notched edge of the module with the tab in the slot
(1)
, and then press the module into the slot
at an angle until it is seated
(2)
.
2.
Press down on the module until the side retention clips snap into place
(3)
.
Component replacement procedures
35