HP OMEN 15.6 Maintenance and Service Guide - Page 68
When installing a camera module, before connecting the cable, the module
View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
10. If you need to remove the camera module: a. Lift up evenly across the module and peel the module up from the display back cover (1), and then disconnect the cable from the reverse ZIF connector on the module (2). The camera module is available as spare part number L98760-001. b. When installing a camera module, before connecting the cable (1), be sure to route the cable under the module (2), and then press the module evening into place (3). 58 Chapter 6 Removal and replacement procedures for authorized service provider parts
10.
If you need to remove the camera module:
a.
Lift up evenly across the module and peel the module up from the display back cover
(1)
, and then
disconnect the cable from the reverse ZIF connector on the module
(2)
. The camera module is
available as spare part number L98760-001.
b.
When installing a camera module, before connecting the cable
(1)
, be sure to route the cable under
the module
(2)
, and then press the module evening into place
(3)
.
58
Chapter 6
Removal and replacement procedures for authorized service provider parts