HP OMEN 15.6 Maintenance and Service Guide - Page 57
IR cable ZIF, Touchpad cable ZIF
View all HP OMEN 15.6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (Bottom cover on page 31). 3. Remove the solid-state drive to the left of the battery (Solid-state drive on page 32). 4. Remove the battery (see Battery on page 37). 5. Remove the fans (see Fans on page 44). When you replace the system board, be sure to remove the following components (as applicable) from the defective system board and install them on the replacement system board: ● Memory modules (see Memory modules on page 34). ● Solid-state drives (see Solid-state drive on page 32). ● Heat sink (see Heat sink on page 41). Remove the system board: 1. Disconnect the following connectors from the system board: ● IR cable (ZIF) (1) ● Display cable (2) ● Power connector cable (3) ● Left speaker cable (4) ● Card reader/audio board cable (ZIF) (5) ● RGB board cable (ZIF) (6) ● WLAN antennas from integrated WLAN module (7) ● Touchpad cable (ZIF) (8) ● Keyboard backlight cable (ZIF) (9) ● Right speaker cable (10) ● USB board cable (ZIF) (11) Component replacement procedures 47