HP Pavilion a1300 Getting Started Guide - Page 36
Type 6 connectors - multi-streaming: See Configuring Audio Output
View all HP Pavilion a1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 For type 6 connectors only, connect the side speaker cable to the gray connector on the back of your PC. 5 Connect the center speaker and subwoofer speaker cable to the gold connector on the back of your PC. 6 Connect the cables to the audio system. 7 Connect the front, rear, side, and center speakers to the subwoofer. Refer to the speaker documentation. 8 Turn on the PC. NOTE: Always turn on the PC before you turn on the speaker system. 9 Plug in the speaker system power. 10 Turn on the speaker system. 11 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: • Type 6 connectors: See "Configuring Audio Output with Sound Effect Manager" on page 38. • Type 6 connectors - multi-streaming: See "Configuring Audio Output with Realtek HD Sound Effect Manager" on page 41. The following diagram shows a typical 7.1 audio installation: 30 Getting Started Guide