HP Pavilion a1300 Getting Started Guide - Page 42
Configuring Audio Output
View all HP Pavilion a1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
To connect digital audio speakers: 1 Turn off the PC. 2 Connect the digital input (S/PDIF) on the digital speakers or a digital audio system to the orange digital out connector that matches the back of your PC: • Type 3 is three connectors • Type 6 is six connectors • Type S is sound card 3 DIGITAL AUDIO OUT 6 DIGITAL AUDIO OUT S 3 Turn on the PC. NOTE: Always turn on the PC before you turn on the speaker system. 4 Plug in the speaker system power. 5 Turn on the speaker system. 6 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: • Audio card with digital output and type 3 connectors: See "Configuring Audio Output with Multi-channel Sound Manager" on page 37. Follow the instructions to enable digital audio output. • Audio card with digital output and type 6 connectors: See "Configuring Audio Output with Sound Effect Manager" on page 38. Digital audio output is already enabled as the default. Configuring Audio Output You can configure your speaker's audio output with the following software. Use the software that applies to your PC model: • WinDVD Player • Multi-channel Sound Manager (type 3 connectors) • Sound Effect Manager (type 6 connectors) • Realtek HD Sound Effect Manager (multi-streaming audio) 36 Getting Started Guide