HP ProBook 4446s HP ProBook 4445s Notebook PC HP ProBook 4446s Notebook PC - M - Page 43
Optical drive, Remove the Phillips PM2.5×6.0 screw
View all HP ProBook 4446s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description Blu-ray ROM DVD±RW SuperMulti DL Drive DVD±RW DL Drive Spare part number 691110-001 691111-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33). 5. Remove the bottom door (see Bottom door on page 34). Remove the optical drive: 1. Position the computer upside-down with the right side toward you. 2. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer. 3. Push the optical drive tab (2) to release the optical drive from the computer. Component replacement procedures 35