HP ProBook 4446s HP ProBook 4445s Notebook PC HP ProBook 4446s Notebook PC - M - Page 54
Metal heat shield, Position the computer upside-down with the battery bay away from you.
View all HP ProBook 4446s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Metal heat shield Before removing the metal heat shield, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33). 5. Remove the optical drive (see Optical drive on page 35) 6. Remove the bottom door (see Bottom door on page 34). 7. Remove the hard drive (see Hard drive on page 38). 8. Remove the memory (see Memory modules on page 40). 9. Remove the keyboard (see Keyboard on page 44). Remove the Metal heat shield: 1. Position the computer upside-down with the battery bay away from you. 2. Remove the three Phillips screws (1) that secure the shield. 3. Rotate the shield up (2), then lift the shield out of the enclosure (3). Reverse this procedure to install the metal heat shield. 46 Chapter 4 Removal and replacement procedures