HP ProBook 4446s HP ProBook 4445s Notebook PC HP ProBook 4446s Notebook PC - M - Page 56
Top cover
View all HP ProBook 4446s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Lift the fan at an angle to remove it from the computer (3). Reverse this procedure to install the fan. NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-in) clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Top cover Description Top cover with TouchPad for use in models with a fingerprint reader Top cover with TouchPad for use in models without a fingerprint reader Spare part number 683666-001 683667-001 Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 33) b. Bottom door (see Bottom door on page 34). 48 Chapter 4 Removal and replacement procedures