HP ProBook 4446s HP ProBook 4445s Notebook PC HP ProBook 4446s Notebook PC - M - Page 84

the display enclosure., at the top that secure the panel

Get HP ProBook 4446s PDF manuals and user guides View all HP ProBook 4446s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

11. Remove the display bezel. The spare part number for the display bezel for webcam use is 683641-001. The spare part number for the display bezel without webcam is 683642-001. 12. If it is necessary to replace the webcam module (shown in the following image) or microphone module from the display enclosure, disconnect the cable from the module (1), and then gently pull the module away from the double-sided tape on the display enclosure (2). The webcam module is available using spare part number 683508-001. NOTE: The microphone module is removed using the same procedure and is available using spare part number 647675-001 13. If it is necessary to replace the display panel, remove the four Phillips PM2.5×4.0 screws (1) at the bottom and two Phillips PM2.5×4.0 broadhead screws (2) at the top that secure the panel to the display enclosure. 14. Rotate the top of the panel upward to remove it from the housing.. The display panel is available using the following spare part numbers: ● 646375-001: 35.6-cm (14.0-inch), anti-glare ● 646989-001: 35.6-cm (14.0-inch), BrightView 76 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
11.
Remove the display bezel.
The spare part number for the display bezel for webcam use is 683641-001.
The spare part number for the display bezel without webcam is 683642-001.
12.
If it is necessary to replace the webcam module (shown in the following image) or microphone
module from the display enclosure, disconnect the cable from the module
(1)
, and then gently
pull the module away from the double-sided tape on the display enclosure
(2)
.
The webcam module is available using spare part number 683508-001.
NOTE:
The microphone module is removed using the same procedure and is available using
spare part number 647675-001
13.
If it is necessary to replace the display panel, remove the four Phillips PM2.5×4.0 screws
(1)
at
the bottom and two Phillips PM2.5×4.0 broadhead screws
(2)
at the top that secure the panel to
the display enclosure.
14.
Rotate the top of the panel upward to remove it from the housing..
The display panel is available using the following spare part numbers:
●
646375-001: 35.6-cm (14.0-inch), anti-glare
●
646989-001: 35.6-cm (14.0-inch), BrightView
76
Chapter 4
Removal and replacement procedures