HP ProLiant DL160se HP ProLiant DL160se G6 Server Maintenance and Service Guid - Page 39
Cable connections, CAUTION, Table 8, Cable, Cable Designator
![]() |
View all HP ProLiant DL160se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
CAUTION: Always pull the connector-NEVER pull on the cable. Pulling on the cable could damage the cable and result in a failed power supply. Figure 3 Unplugging Power Cable Cable connections The following tables provide information about switching power supply cable connector labels. Table 8 Cable connections from the 460W/750 W Hot-plug Power Supply (Optional) Cable Switching power supply Switching power supply Switching power supply Switching power supply Switching power supply Switching power supply Switching power supply Switching power supply Switching power supply To Cable Designator System board 24-pin power connector P1 System board 8-pin power connector P2 System board 4-pin power connector P3 Optical disc drive CD System board power backplane connector RPS Graph card power connector P4 4/8 HDD hot-plug Backplane power P5 connector 4 Non hot-plug HDD P6,P7,P8,P9 2 HDD hot-plug Backplane power connector P10/P11 NOTE: P6,P7,P8,P9,P10 and P11are extended connectors from P5, P4 are the extended 6-pin connector from 10-pin P4 connector of power supply. Table 9 Cable connections from the 500 W Non-hot-plug Power Supply Cable To Cable Designator Removal and replacement procedures 39
![](/manual_guide/products/hewlettpackard-proliant-dl160se-hp-proliant-dl160se-g6-server-maintenance-service-guide-08d2859/39.png)