HP ProLiant DL160se HP ProLiant DL160se G6 Server Maintenance and Service Guid - Page 69
To remove the memory module, CAUTION, Gently pull the memory module upward to remove it from the slot.
![]() |
View all HP ProLiant DL160se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 45 DIMM Slots NOTE: Before installing the memory, remove the air baffle first. For a detailed procedure, see the "Processor" section in this chapter. To remove the memory module: 1. Completely open the holding clips securing the memory module. 2. Gently pull the memory module upward to remove it from the slot. Figure 46 Removing the Memory Module CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static bag. Removal and replacement procedures 69
![](/manual_guide/products/hewlettpackard-proliant-dl160se-hp-proliant-dl160se-g6-server-maintenance-service-guide-08d2859/69.png)
Removal and replacement procedures
69
Figure 45
DIMM Slots
NOTE:
Before installing the memory, remove the air baffle first. For a detailed procedure, see
the ”Processor” section in this chapter.
To remove the memory module:
1.
Completely open the holding clips securing the memory module.
2.
Gently pull the memory module upward to remove it from the slot.
Figure 46
Removing the Memory Module
CAUTION:
Place the memory module on a static-dissipating work surface or inside of an anti-static
bag.