HP ProLiant DL160se HP ProLiant DL160se G6 Server Maintenance and Service Guid - Page 63

To remove the air baffle, To remove the heat sink, CAUTION, IMPORTANT

Get HP ProLiant DL160se - G6 Server PDF manuals and user guides View all HP ProLiant DL160se manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

To remove the air baffle: 1. Gently rock the air baffle up. 2. Take the air baffle out from the system board. Figure 37 Removing the Air Baffle To remove the heat sink: 1. Loosen the two spring-loaded screws. 2. Lift the heat sink away from the system board. CAUTION: Place the heat sink down in an upright position with the thermal patch facing upward. Do not let the thermal patch touch the work surface. Figure 38 Removing the Heat Sink Assembly IMPORTANT: If the heat sink has been removed for any reason on a previously installed processor, it is critical that you apply more grease compound to the integrated heat spreader on the processor to ensure proper thermal bonding between the processor and the heat sink. Removal and replacement procedures 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
Removal and replacement procedures
63
To remove the air baffle:
1.
Gently rock the air baffle up.
2.
Take the air baffle out from the system board.
Figure 37
Removing the Air Baffle
To remove the heat sink:
1.
Loosen the two spring-loaded screws.
2.
Lift the heat sink away from the system board.
CAUTION:
Place the heat sink down in an upright position with the thermal patch facing upward.
Do not let the thermal patch touch the work surface.
Figure 38
Removing the Heat Sink Assembly
IMPORTANT:
If the heat sink has been removed for any reason on a previously installed processor, it
is critical that you apply more grease compound to the integrated heat spreader on the processor to
ensure proper thermal bonding between the processor and the heat sink.