HP ProLiant DL160se HP ProLiant DL160se G6 Server Maintenance and Service Guid - Page 95
To reinstall the system fan, Removal and replacement procedures
![]() |
View all HP ProLiant DL160se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Figure 88 Removing the System Fan To reinstall the system fan: 1. Put the system fan cable through the system fan cage. 2. Hold the system fan and press the system fan into the system fan bracket. 3. Connect the system fan cable to its corresponding board connector. Figure 89 Reinstalling the System Fan Removal and replacement procedures 95
![](/manual_guide/products/hewlettpackard-proliant-dl160se-hp-proliant-dl160se-g6-server-maintenance-service-guide-08d2859/95.png)
Removal and replacement procedures
95
Figure 88
Removing the System Fan
To reinstall the system fan:
1.
Put the system fan cable through the system fan cage.
2.
Hold the system fan and press the system fan into the system fan bracket.
3.
Connect the system fan cable to its corresponding board connector.
Figure 89
Reinstalling the System Fan