HP ProLiant DL380 ProLiant DL380 Generation 2 Server Maintenance and Service G - Page 19
Extending the Server from the Rack,
View all HP ProLiant DL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Removal and Replacement Procedures Extending the Server from the Rack To extend the server from the rack: 1. Loosen the front panel thumbscrews that secure the server faceplate to the front of the rack. 2. Extend the server until the server rail-release latches engage. Figure 2-1: Extending the server from the rack WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the component into or out of the rack. The sliding rails could pinch your fingertips. 3. After performing the maintenance procedure, slide the server back into the rack: a. Press the server rail-release latches. b. Slide the server fully into the rack. c. Secure the server by tightening the thumbscrews. Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide 2-5 COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM