HP ProLiant DL380 ProLiant DL380 Generation 2 Server Maintenance and Service G - Page 64
Removing the heatsink and processor from the system, board, Lift the locking lever
View all HP ProLiant DL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removal and Replacement Procedures 8. Remove the heatsink . CAUTION: Discard the heatsink after you remove it from the processor. The heatsink is for one-time use only; after use the thermal interface material is degraded and does not provide proper thermal dissipation. 9. Lift the locking lever . 10. Remove the processor . 1 3 2 Figure 2-45: Removing the heatsink and processor from the system board To replace a processor: CAUTION: Processor socket 1 must be populated with a processor at all times. The system fails to boot if the socket is not populated. CAUTION: Do not mix processors of different types or speeds. CAUTION: You must align the processor pins to seat the processor into the socket IMPORTANT: When installing a new processor, refer to the documentation that ships with the processor. 11. Align the notched corner of the processor with the notched corner of the socket. 2-50 Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM