HP ProLiant DL380 ProLiant DL380 Generation 2 Server Maintenance and Service G - Page 53
Expansion Slot Cover (Slot 1), Removing the expansion slot cover from, slot 1
View all HP ProLiant DL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Removal and Replacement Procedures Expansion Slot Cover (Slot 1) To remove an expansion slot cover from slot 1: 1. Power down the server. See the "Powering Down the Server" section in this chapter. 2. Extend or remove the server from the rack. See the "Preparation Procedures" section in this chapter. 3. Remove the access panel. See the "Access Panel" section in this chapter. 4. Remove the PCI riser cage. See the "PCI Riser Cage" section in this chapter. 5. Remove the expansion slot thumbscrew . 6. Remove the expansion slot cover from slot 1 . 2 1 Figure 2-34: Removing the expansion slot cover from slot 1 CAUTION: Always install either an expansion board or an expansion slot cover. Operating the server without an expansion board or slot cover results in improper airflow and cooling that can lead to thermal damage. Reverse steps 1 through 6 to replace the expansion slot cover. Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide 2-39 COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM