HP ProLiant DL380 ProLiant DL380 Generation 2 Server Maintenance and Service G - Page 39
Removing an expansion board from slots 2 and 3, and pull to remove the expansion board
View all HP ProLiant DL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removal and Replacement Procedures 7. Press the PCI slot release lever to unlock it . 8. Open the PCI slot release lever . 9. Remove the expansion board from the slot: a. If the expansion board is installed in slot 2, grasp the PCI expansion board ejector/divider and pull to remove the expansion board . b. If the expansion board is installed in slot 3, grasp the expansion board and pull to remove it from the slot. 2 3 4 1 Figure 2-20: Removing an expansion board from slots 2 and 3 CAUTION: Always install either an expansion board or an expansion slot cover. Operating the server without an expansion board or slot cover results in improper airflow and cooling that can lead to thermal damage. Reverse steps 1 through 9 to replace the expansion board. Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide 2-25 COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM