HP ProLiant DL380 ProLiant DL380 Generation 2 Server Maintenance and Service G - Page 55
PCI Slot Release Lever (Slots 2 and 3), Expansion Board Slots 2
View all HP ProLiant DL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Removal and Replacement Procedures PCI Slot Release Lever (Slots 2 and 3) To remove a PCI slot release lever: 1. Power down the server. See the "Powering Down the Server" section in this chapter. 2. Extend or remove the server from the rack. See the "Preparation Procedures" section in this chapter. 3. Remove the access panel. See the "Access Panel" section in this chapter. 4. Remove the expansion board or slot cover from the slot: a. If an expansion board is installed in the slot, see the "Expansion Board (Slots 2 and 3)" section in this chapter. b. If an expansion slot cover is installed in the slot, see the "Expansion Slot Cover (Slots 2 and 3)" section in this chapter. 5. Remove the PCI riser cage. See the "PCI Riser Cage" section in this chapter. 6. Press the slot release lever to unlock it . 7. Open the slot release lever . 2 1 Figure 2-36: Opening the PCI slot release lever Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide 2-41 COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM