HP Q1581A HP StorageWorks DAT SAS Tape Drives User Guide (DW092-90905, Novembe - Page 28
Option 1: Connect to a dedicated HBA (all HP ProLiant servers and all non-HP servers)
UPC - 882780612716
View all HP Q1581A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2. The server/tape drive matrix shows top-level compatibility. Be sure to click on the box for your combination of server and tape drive to display a further page with detailed connectivity information. Option 1: Connect to a dedicated HBA (all HP ProLiant servers and all non-HP servers) The following instructions are valid ONLY IF you have purchased and installed an additional HBA. Always refer to http://www.hp.com/go/connect BEFORE installing your tape drive. IMPORTANT: A SAS cable for connection to a dedicated HBA is supplied with the tape drive. This is a split cable, but the second branch is not required. Do NOT remove the tie wrap and cover on the spare connector. 1. If necessary, install a new HBA. Follow the instructions supplied with the HBA to install it and its driver. 2. Connect the SAS cable to the dedicated HBA. 1. Supplied HP Mini-SAS cable 4. Dedicated HBA 2. Connect SAS cable to dedicated HBA 5. SAS connector to tape drive 3. Unused connector on SAS cable (do not remove tie wrap or cover) 6. Power connector to server Figure 8 Connecting cables to the dedicated HBA . 28 Installing an internal DAT tape drive