HP Scanjet 8200c HP Scanjet 8200 series scanners - (English) User Manual - Page 16
select original types, care and maintenance, clean the scanner glass, clean the TMA - scanjet 8200
View all HP Scanjet 8200c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
chapter 2 select original types If the software prompts you for an original type, you have two choices: Picture or Document. The scanner optimizes settings based on your choice. Use the following guidelines to determine the best original type for your needs. If your original consists of Select this original type Text, or both text and graphics Document A printed photograph or graphic Picture To change the original types, see change button settings on page 9. care and maintenance Occasional cleaning of your scanner helps ensure optimal performance. The amount of care necessary depends upon several factors, including the amount of use, the type of media that is fed through the ADF, and the environment. You should perform routine cleaning as necessary. Routine cleaning should include cleaning the scanner glass, the TMA, and the ADF. clean the scanner glass 1 Disconnect the power cable from the scanner. 2 Open the scanner lid. 3 Clean the glass using a soft, lint-free cloth sprayed with a mild glass cleaner. Caution! Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl alcohol because it can leave streaks on the glass. Do not spray the glass cleaner directly on the glass. If too much glass cleaner is applied, the cleaner could run to the edges and damage the scanner. 4 Dry the scanner glass using a dry, soft, lint-free cloth. 5 When finished, reconnect the power cable to the scanner. clean the TMA Clean the TMA using a dry, soft, lint-free cloth. If necessary, lightly spray the cloth with glass cleaner and wipe the TMA. clean the ADF The ADF requires periodic cleaning depending upon the amount of use and the type of media that is fed through the ADF. You can clean the ADF two ways: running the cleaning cloth through the ADF, or by manually cleaning the feed rollers. Set up a cleaning routine that is appropriate for your scanner. 10 hp scanjet 8200 series