HP Scanjet 8200c HP Scanjet 8200 series scanners - (English) User Manual - Page 17
run the cleaning cloth through the ADF, clean the feed roll assembly manually
View all HP Scanjet 8200c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English how to use the scanner run the cleaning cloth through the ADF 1 Open the sealed container, starting at the notch. Take care not to tear the cleaning cloth inside. 2 Remove the cleaning cloth and unfold. 3 Place the unfolded cloth into the paper input tray. place the unfolded cloth into the paper input tray 4 Press the SCAN DOCUMENT TO button. The cleaning cloth will run through the ADF. Wait two minutes to allow the components to dry before proceeding to the next step. 5 Place up to five pages of printed paper in the paper input tray. Scan and view the results. scan up to five pages 6 If streaks still appear, repeat Steps 3 through 6. The cleaning cloth can be cycled through the ADF up to five times. clean the feed roll assembly manually 1 Open the hatch and lift the green tab to the fully open position. The feed roller assembly should be in a nearly vertical position. lift the green tab to expose the feed rollers 2 With a Paper Path Cleaning Cloth (C9915-60056), clean each of the feed rollers and the small rubber pad located below the rollers. Note: If you do not have the paper path cleaning cloth, use a lint-fee cloth slightly dampened with isopropyl alcohol. 3 Wipe the area around the small rubber pad to remove any paper dust. 4 Lower the green tab and feed roller assembly. 5 Close the hatch. user's manual 11