HP Server tc3100 hp server remote management card user guide - Page 55
Troubleshooting - motherboard
View all HP Server tc3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7 Troubleshooting This chapter provides some guidelines for troubleshooting the HP Server Remote Management Card. Different sections highlight difficulties related to: • Installation problems • Paging concerns • Remote client issues Problems with Installation The HP Server Remote Management Card does not respond. Make sure that the HP Server Remote Management Card is securely seated in a PCI slot. Make sure that the 50-pin cable is connected. Check the diagnostic LEDs located below the RS-232 port on the back panel of the card. If the green (heartbeat) light is not alternately flashing, something is wrong with the card. See Appendix F, "LED Codes," for more information. Make sure the server's system BIOS has been updated to the latest release (see Chapter 3 for details). I can only view two sensors built into my server, but I know that there must be more. If the function "Show all Sensors" lists PCI Efficiency and PCI Utilization only, check that the cable connection between the HP Server Remote Management Card and the server's motherboard is installed and that both end connectors are securely engaged. Paging I generated a test page from the HP Server Remote Management Card Configuration page, but never received it. Has a pager number and paging string been set up in the HP Server Remote Management Card? Also check to see that the telephone cord is properly connected to the external modem. Verify that the correct cable is properly connected to the card. 49