HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 and SAN Director 2/128 I - Page 43
Powering on the switch, ON/OFF switch for a 16-port card
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Powering on the switch NOTE: If you plan to use a modem with the Core Switch 2/64 or a SAN Director 2/128, you need to connect it prior to powering on the switch. To install a modem, refer to "Setting up and installing modems" on page 123. 1. Verify that the ON/OFF switches for each 16-port card and CP card are in the ON position (see Figure 11). Port Card ON/OFF Switch (in "OFF" position) Power LED Status LED Port Speed LED (16x) Port Status LED (16x) scale: 5/16" = 1" ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ON/OFF Switch in "ON" position ! Fibre Channel Port (16x) Ejector (2x) 2.017 Figure 11 ON/OFF switch for a 16-port card Core Switch 2/64 and SAN Director 2/128 installation guide 43
43
Core Switch 2/64 and SAN Director 2/128 installation guide
Powering on the switch
NOTE:
If you plan to use a modem with the Core Switch 2/64 or a SAN Director 2/128, you
need to connect it prior to powering on the switch. To install a modem, refer to ”
Setting up and
installing modems
” on page 123.
1.
Verify that the ON/OFF switches for each 16-port card and CP card are in the ON
position (see
Figure 11
).
Figure 11
ON/OFF switch for a 16-port card
2.017
Power LED
Status LED
Fibre Channel
Port (16x)
Port Card
!
15
d
14
c
13
b
12
a
11
d
10
c
9
b
8
a
7
d
6
c
5
b
4
a
3
d
2
c
1
b
0
a
Port Speed LED
(16x)
Port Status LED
(16x)
Ejector
(2x)
ON/OFF Switch
(in "OFF" position)
!
ON/OFF Switch
in "ON" position