HP StorageWorks 7410 HP StorageWorks Virtual Array va 7000 family - Installati - Page 30
CONTROLLER, JBOD 1, VA 7110 Back-End Fiber Optic Cabling & Addressing 2 Disk Enclosures - ink
View all HP StorageWorks 7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4 Set the address switches on the disk enclosures. See Figure 14. Each disk enclosure should have a unique address. Both link controller cards in the enclosure must be set to the same address. Note For ease of management, it is recommended that odd addresses (1, 3, 5) be used for disk enclosures on loop 1 and even addresses (0, 2, 4) be used for disk enclosures on loop 2. Because the two back-end FC loops are independent, disk enclosures on different loops can have the same address. Figure 12 VA 7110 Back-End Fiber Optic Cabling & Addressing (2 Disk Enclosures) 3 4 ADDRESS 5 2 6 1 0 3 4 ADDRESS 5 2 6 1 0 A621 4- 60001 A6 214- 6000 1 CONTROLLER A6 214- 6000 1 PORT 0 3 4 ADDRESS 5 LCC LINK 2 ACTIVE 6 LCC ACTIVE FC-AL 100M B/s 1 0 FAULT LINK ACTIVE PORT 1 FC-AL 100 MB/s PORT 0 3 4 ADDRESS 5 LCC L INK 2 ACTIVE 6 L CC AC TIVE FC-AL 100M B/s 1 0 FAULT JBOD 1 LINK ACTIVE PORT 1 FC-AL 100 MB/s PORT 0 3 4 ADDRESS 5 LCC LINK 2 ACTIVE 6 LCC ACTIVE FC-AL 100M B/s 1 0 FAULT LINK ACTIVE PORT 1 FC-AL 100 MB/s A621 4- 60001 PORT 0 3 4 ADDRESS 5 LCC L INK 2 ACTIVE 6 L CC AC TIVE FC-AL 100M B/s 1 0 FAULT JBOD 2 LINK ACTIVE PORT 1 FC-AL 100 MB/s 3 4 ADDRESS 5 2 6 1 0 3 4 ADDRESS 5 2 6 1 0 30 Virtual Array Installation Guide