HP StorageWorks 7410 HP StorageWorks Virtual Array va 7000 family - Installati - Page 34
Step 16. Power-on all array enclosures, To prevent format corruption, do not remove disk drives or
View all HP StorageWorks 7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Step 16. Power-on all array enclosures 1 Power-on the disk enclosures. 2 Power-on the controller enclosure. Disk Sector Reformatting If the disks in the disk enclosures are formatted with 512-byte sectors, they are reformatted to 520-byte sectors at this time. Sector reformatting takes 30 to 60 minutes to complete, depending on disk drive capacity. Larger capacity disks take longer to reformat. If the disks have 520-byte sectors, this process is not performed. The disk activity LEDs will flash during sector reformatting. When all disk lights are stable, the reformatting process is complete, and the installation can continue. Caution Do not proceed with the installation of the array until the reformatting is complete. To prevent format corruption, do not remove disk drives or power-off the array during the power-on sequence. If a disk drive is removed or the array is powered off, the array will detect a corrupt format, re-issue the Format command, and restart the formatting process. 34 Virtual Array Installation Guide