HP Vectra VE 5/xxx HP Vectra VE 5/xx Series 2, User's Guide - Page 44
How to Install Accessories In Your PC, VESA pass-through connector, for video boards, Protection
View all HP Vectra VE 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3 How to Install Accessories In Your PC Installing Accessory Boards 6 Align the board's connector with the slot's socket. Firmly press the board into the socket. Ensure the board's connector engages completely with the socket and does not touch components on other boards. 7 Secure the board by replacing the slot cover screw. If you loosened the screws on adjacent slots, tighten them. 8 If you install a VESA-standard video adapter board which uses the integrated video graphics controller, connect the accessory board's cable to the VESA pass-through connector on the system board. To access the VESA pass-through connector, lift the power supply out of its seating, and lay it upside down on the frame above the disk drives. Remove the protection cover from the rear base of the PC. VESA pass-through connector for video boards Protection cover 9 Install any other accessories before replacing the power supply and the cover. Reconnect all cables and power cords. 32 English