HP Vectra VE 5/xxx HP Vectra VE 5/xx Series 2, User's Guide - Page 83
After Installing an IDE Drive
View all HP Vectra VE 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
4 The HP Setup Program After Installing an IDE Drive After Installing an IDE Drive After installing a second IDE drive you will need to run the Setup program to confirm that the drive has been detected by the PC. When an Additional IDE 1 Switch on the PC. Drive is installed 2 When F2=Setup is displayed, press to run the Setup program. 3 From the "Configuration" menu, choose "Hard disk drive". 4 Select the disk you have just installed. 5 Select Auto in the Type field. 6 Select Autotype fixed disk and press . 7 Press to save your choice and exit Setup. Refer to the operating system documentation for information about formatting a drive and installing the operating system. English 71
English
71
4
The HP Setup Program
After Installing an IDE Drive
After Installing an IDE Drive
After installing a second IDE drive you will need to run the
Setup
program to confirm that the drive has been detected by the PC.
When an Additional IDE
Drive is installed
1
Switch on the PC.
2
When
F2=Setup
is displayed, press
to run the
Setup
program.
3
From the “Configuration” menu, choose “Hard disk drive”.
4
Select the disk you have just installed.
5
Select
Auto
in the
Type
field.
6
Select
Autotype fixed disk
and press
.
7
Press
to save your choice and exit
Setup
.
Refer to the operating system documentation for information about
formatting a drive and installing the operating system.