HP Vectra VE 5/xxx HP Vectra VE 5/xx Series 2, User's Guide - Page 76
ub-menu items for each of these fields, are given after On-board Bus IDE adapters, in this table.
View all HP Vectra VE 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4 The HP Setup Program Using the HP Setup Program Setup Item Default Hard Disk Drives Hard disk drive 0 (xxxx MB) 642 MB Hard disk drive 1 (xxxx MB) xxx MB Hard disk drive 2 (xxxx MB) xxx MB Hard disk drive 3 (xxxx MB) xxx MB Translation method Extended On-board Bus IDE adapters Both Action Configure IDE drive 0. It is not recommended to connect a CD-ROM on a channel which already has an IDE hard disk drive. Sub-menu items for each of these fields are given after "On-board Bus IDE adapters" in this table. Select "Standard" only if you are running a UNIX Operating System. Enable or disable the on-board IDE adapters. "Primary" enables only the HDD data cable (marked "HDD" next to the system board attachment). "Both" enables the HDD data cable and the CD-ROM data cable (marked "CD-ROM" next to the system board attachment). Autotype fixed disk Type User 642 MB Automatically attempts to detect and identify the IDE drive when you press the Enter key. Select "Auto" for automatic hard disk drive detection. (To initiate automatic hard disk detection, press the Enter key at the "Autotype fixed disk" item). "User" allows you to edit all the detected parameters. Select "CD" if drive is an IDE CD-ROM, and "None" if there is no drive. 64 English