HP Vectra VE 5/xxx HP Vectra VE 5/xx Series 2, User's Guide - Page 77
Enable or disable Logical Block Addressing
View all HP Vectra VE 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4 The HP Setup Program Using the HP Setup Program Setup Item Hard Disk Drives (continued) Cylinders* Heads* Sectors/Track* Default 944 14 40 Multi-sector transfers* 8 sectors LBA mode control* Enabled 32 bit I/O Transfer mode* Enabled PI0 mode 3 * Only available if "User" mode has been selected as "Type". PC I Devices Slot #1 Bus Master Enabled Slot #2 Bus Master Enabled Slot #3 Bus Master Enabled PCI IRQ line 1 Auto PCI IRQ line 2 Auto PCI IRQ line 3 Auto PCI IRQ line 4 Auto Action Sets the number of hard disk drive cylinders. Sets the number of hard disk drive heads. Sets the number of hard disk drive sectors per track. Determines the number of sectors per block for multiple sector transfers. Enable or disable Logical Block Addressing mode in place of Cylinder Heads Sectors. Enable or disable 32 bit data transfer. Selects the hard disk drive transfer mode and data transfer rate. Enable this option if you need the BIOS to set the PCI Bus Master bit. This could be necessary for some old PCI cards. Select an IRQ number only if necessary (for example for SCO-UNIX). English 65