HP dx2308 HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st - Page 14
Computer Setup—Main, Option, Description, Date mm:dd:yy, Time hh:mm:ss, SATA Port 1, Onboard FDC
View all HP dx2308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Computer Setup-Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2-3 Computer Setup-Main Option Description Date (mm:dd:yy) Allows you to set system date. Time (hh:mm:ss) Allows you to set system time. SATA Port 1 SATA Port 2 SATA Port 3 SATA Port 4 For each, allows you to: ● run HDD self-test for selected channel: ● SMART Status Check ● HDD Short Self-Test ● HDD Extended Self-Test ● auto-detect HDD size and head ● set extended IDE drive on selected channel to: ● None ● Auto ● set access mode on selected channel to: ● Large ● Auto ● view: ● Firmware ● Capacity ● Cylinder ● Head ● Precomp ● Landing Zone ● Sector Onboard FDC Controller Disables/enables the floppy disk controller. Drive A Allows you to set Drive A to: ● None ● 1.44M, 3.5 in. Halt On Allows you to set POST error behavior to: ● All Errors ● No Errors 6 Chapter 2 Computer Setup (F10) Utility ENWW