HP dx2308 HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st - Page 66

System Fan

Get HP dx2308 - Microtower PC PDF manuals and user guides View all HP dx2308 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

System Fan 1. Prepare the computer for disassembly (Preparation for Disassembly on page 37) 2. Remove the access panel (Access Panel on page 38) 3. Disconnect the cable that connects the system fan to the system board. 4. Cut the tie-wrap (1) at the bottom of the fan that secures the CPU power cable (2) to the fan. 5. Remove the screws that secure the fan to the chassis and remove the fan. To install the fan, reverse the removal procedures. NOTE: When installing the fan, the CPU power cable must be plugged into the system board before securing the cable to the bottom of the fan cage. This will ensure that the cable is properly positioned. 58 Chapter 7 Removal and Replacement Procedures- Microtower (MT) Chassis ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
System Fan
1
.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
37
)
2
.
Remove the access panel (
Access Panel
on page
38
)
3
.
Disconnect the cable that connects the system fan to the system board.
4
.
Cut the tie-wrap (1) at the bottom of the fan that secures the CPU power cable (2) to the fan.
5
.
Remove the screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.
NOTE:
When installing the fan, the CPU power cable must be plugged into the system board
before securing the cable to the bottom of the fan cage. This will ensure that the cable is properly
positioned.
58
Chapter
7
Removal and Replacement Procedures— Microtower (MT) Chassis
ENWW