Hitachi C8FSE Instruction Manual - Page 10

English When cutting the workpiece which has the dimension of "*" there might be some possibility of the lower end of the circular saw to touch with the workpiece, even if the motor head is located at the lower limit position. Pay attention when cutting the workpiece. For further details, refer to "PRACTICAL APPLICATIONS" on page 18. Mount the auxiliary board on the fence surface (Refer ( ) the thickness of auxiliary board). Refer to "5. Cutting large workpieces" on page 20 (Fig. 27). ACCESSORIES WARNING: Accessories for this power tool are mentioned in this Instruction Manual. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. STANDARD ACCESSORIES 1 8-1/2" (216mm) TCT Saw blade (1 piece) 2 Dust bag (1 piece) 4 10mm BOX wrench (1 piece) 6 Side handle (1 piece) For how to use, refer to page 25. 3 Vise Assembly w/knob bolt (1 piece) 5 Holder (1 piece) No. of teeth 24 Code No. 998840 (C330274) For how to use, refer to page 18. For how to use, refer to page 15. Fig. 3 OPTIONAL ACCESSORIES...sold separately 1 Extension Holder and Stopper (Code No. 321553) 2 Saw blade 8-1/2" (216mm) TCT Saw blade (Total teeth: 36) (Code No. 998860) 3 Saw blade 8-1/2" (216mm) TCT Saw blade (Total teeth:60) (Code No.998862) 4 Saw blade 8-1/2" (216mm) TCT Saw Blade for aluminum (Total teeth: 60) (Code No.998864) 5 Crown molding Vise Ass'y (Code No. 329782) (Include Crown molding Stopper (L)) 6 Crown molding Stopper (L) (Code No. 321374) 7 Crown molding Stopper (R) (Code No. 321373) NOTE: Accessories are subject to change without any obligation on the part of the HITACHI. APPLICATIONS Wood and aluminum sash. 10