Hitachi C8FSE Instruction Manual - Page 11

Preparation Before Operation

Get Hitachi C8FSE - 8-1/2inch Sliding Compound Miter Saw PDF manuals and user guides
UPC - 717709012998
View all Hitachi C8FSE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

PREPARATION BEFORE OPERATION Make the following preparations before operating the power tool: 1. Installation 5-13/16"(148mm) Base 5/16" (8mm) Bolt English 9-19/32" (244mm) 1" (25mm) thick bench 11/32" (9mm) 3 Holes 11-21/32" (296mm) Work Bench 5/16" (8mm) Nut Fig. 4 Attach the power tool to a level, horizontal work bench in accordance with Fig. 4. Select 5/16" (8mm) diameter bolts suitable in length for the thickness of the work bench. Bolt length should be at least 1-9/16" (40mm) plus the thickness of the work bench. For example, use 2-9/16" (65mm) or larger bolts for a 1" (25mm) thick work bench. The holder attached to the rear of the base helps stabilize the power tool. 6mm Bolt Holder adjustment: Loosen the 6mm bolt with the supplied 10mm box wrench. Adjust the holder until its bottom surface contacts the work bench surface. After adjustment, firmly tighten the 6mm bolt. Holder Adjust the holder until its bottom surface contacts the work bench surface. Move Fig. 5 2. Install the side handle (Fig. 6) Install the side handle that came enclosed with this unit. Turntable Side handle Fig. 6 Tighten 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
11
English
PREPARATION BEFORE OPERATION
Make the following preparations before operating the power tool:
1.
Installation
Fig. 4
Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.
Select 5/16" (8mm) diameter bolts suitable in length for the thickness of the work bench.
Bolt length should be at least 1-9/16" (40mm) plus the thickness of the work bench.
For example, use 2-9/16" (65mm) or larger bolts for a 1" (25mm) thick work bench.
The holder attached to the rear of the base helps stabilize the power tool.
Holder adjustment:
Loosen the 6mm bolt with the supplied 10mm box wrench.
Adjust the holder until its bottom surface contacts the work bench
surface.
After adjustment, firmly tighten the 6mm bolt.
Fig. 5
2.
Install the side handle (Fig. 6)
Install the side handle that came enclosed with this unit.
Fig. 6
5-13/16"(148mm)
11-21/32" (296mm)
11/32" (9mm)
3 Holes
9-19/32" (244mm)
Turntable
Side handle
Tighten
1" (25mm) thick bench
Work Bench
5/16" (8mm) Nut
5/16" (8mm) Bolt
Base
Move
Adjust the holder
until its bottom
surface contacts the
work bench surface.
Holder
6mm Bolt