Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste Installation Guid - Page 23

LYNXR-2 Series Installation and Setup Guide Data Field Descriptions ✻35 Entry Delay 01 LYNXR-2 SELECTIONS 00-99 = entry delay time in seconds. LYNXR-2SIA SELECTIONS Entries from 30-99 Entered Value 30-96 97 98 Delay in Seconds 30-96 120 180 99 240 ✻36 Entry Delay 02 LYNXR-2 SELECTIONS 00-99 = entry delay time in seconds. LYNXR-2SIA SELECTIONS Entries from 30-99 Entered Value 30-96 97 Delay in Seconds 30-96 120 98 180 99 240 The system will wait the time entered before sounding alarm upon entering if system is not disarmed. UL installations: must be set for a maximum of 45 seconds Note: The LYNXR-2SIA control validates the data entered in this field. If the selection is not valid the control will emit a single long beep indicating that the selection has been rejected. The control replaces the selection with the default value "30", which is displayed on the keypad, and advances to the next field. SIA The Entry delay must be set to a minimum of 30 seconds. The sum of entry delay 1 entered in Field ✻35 and the burglary abort window entered in ✻50 should not exceed 1 minute. The system will wait the time entered before sounding alarm upon entering if the system is not disarmed. UL installations: must be set for a maximum of 45 seconds Note: The LYNXR-2SIA control validates the data entered in this field. If the selection is not valid the control will emit a single long beep indicating that the selection has been rejected. The control replaces the selection with the default value "30", which is displayed on the keypad, and advances to the next field. SIA The Entry delay must be set to a minimum of 30 seconds. The sum of entry delay 2 entered in Field ✻36 and the burglary abort window entered in ✻50 should not exceed 1 minute. AUDIBLE EXIT WARNING/QUICK EXIT (✻37) Note: This field is not available on the LYNXR-2SIA control. ✻37 Audible Exit Warning/Quick Exit Exit Warning 0 = no exit warning sound 1 = provide exit warning sound when armed AWAY Quick Exit 0 = no quick exit 1 = allow quick exit ✻38 Confirmation of Arming Ding LYNXR-2 SELECTIONS 0 = no ding 1 = confirmation ding after arming system 2 = confirmation ding after arming from RF button or RF keypad only LYNXR-2SIA SELECTIONS 0 = no arming confirmation ding after arming system by LYNXR keypad or RF keypad 1 = arming confirmation ding after arming system by LYNXR keypad or RF keypad 2 = arming confirmation ding after arming from RF keypad only Exit Warning: Sound consists of slow continuous beeps until last 5 seconds, when it changes to fast beeps. The warning sound will end at the termination of exit delay. Quick Exit: If enabled, user can restart the exit delay time after arming in STAY mode by entering the user code and pressing the STAY key, or by pressing the STAY key if Quick Arm is enabled. This avoids having the user disarm then rearm the system after allowing someone to enter or exit LYNXR-2 Confirmation of arming is provided by a 1/2 second external sounder "ding" that sounds when closing report is sent, or at the end of exit delay. If Option 2 is selected the external sounder "ding" occurs immediately after the system receives the RF transmission. LYNXR-2SIA Confirmation of arming is provided by a 1/2 second external sounder "ding" .The confirmation ding only sounds when LYNX is Armed Away or disarmed after being Armed Away. If Option 1 is selected, confirmation of arming is provided by a 1/2 second sounder "ding" that sounds when closing report is sent, or at the end of exit delay. If Option 2 is selected the external sounder "ding" occurs immediately after arming from an RF keypad. Note: If LYNXR-2SIA is armed by RF button (key fob), a confirmation ding occurs immediately after arming regardless of field *38 settings. If LYNX is disarmed by RF button (key fob), additional disarming confirmation ding is provided. The ding occurs immediately after disarming and is longer than arming confirmation ding. - 23 -