Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste Installation Guid - Page 58
System Displays, Audio Alarm Verification Two-Way Voice Feature
![]() |
UPC - 781410916135
View all Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
LYNXR-2 Series Installation and Setup Guide System Operation System Displays Display PC PH AC ALARM AWAY BYPASS CHIME FAULT FIRE LOW BAT INSTANT MESSAGE REC STAY TEST Meaning Remote Phone Control feature is active (Appears in place of the clock). System Speaker Phone mode is active (Appears in place of the clock). AC power is present. If not displayed, the system is operating on backup battery power. System is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency alarm). Accompanied by the protection zone that is in alarm. All burglary zones, interior and perimeter, are armed. One or more burglary protection zones have been bypassed. Chime feature is activate A malfunction is discovered in the system; or an open is detected in a fire zone; or a fault in a day/night burglary zone is discovered during a disarmed period. Accompanied by a display of the zone number in trouble. A fire alarm or fire fault is present. Accompanied by a display of the zone that is in alarm Low battery condition in a wireless sensor (if zone number is displayed) or low system battery (if no zone number is displayed). If 00 is displayed, a wireless keypad has a low battery condition. Entry delay is turned off. A message has been recorded and has not yet been played back. The system is in Recording mode. Perimeter Burglary zones, such as protected windows and doors, are armed System is in Test mode. UL Audio alarm verification has not been evaluated by UL. Audio Alarm Verification (Two-Way Voice Feature) This feature allows the central station operator to listen, talk to or conduct a two-way conversation with an individual(s) at the premises. It also assists the operator in gathering information about the nature and location of the alarm that may be helpful in responding to police and fire departments. All LYNXR-2 Series control panels are capable of supporting the Two-Way Voice feature. The LYNXR-2 Series does not make system announcements when the Two-Way voice feature is active. Activation Fire and CO alarms will not trigger an AAV session. A new Fire or CO alarm will end an AAV session that is in progress. The LYNXR-2 Series sends the "alarm message" followed by a "Listen-in-to-Follow message" (Contact ID® code 606) to the Central Station. The Listen-in-to-Follow message causes the Central Station's digital receiver to temporarily hold the phone line for approximately 1-minute. When the LYNXR-2 Series receives the "kissoff" from the central station, indicating that the alarm message has been received, the Two-Way Voice (AAV) feature is activated in the (default) "Listen Mode" and sirens and keypad sounds are discontinued. The LYNXR-2 Series transmits a beep acknowledgment to the Central Station, once per second. The beep alternates between two tones and indicates that the LYNXR-2 Series is waiting for a session command from the Central Station operator. Once a command is issued the beep acknowledgement is discontinued, however, if a command is not issued within two minutes the system will "time out" and the call will be terminated. - 58 -
![](/manual_guide/products/honeywell-lynxrpk2-wireless-selfcontained-security-syste-installation-guide-922413c/58.png)