Husqvarna AUTOMOWER 435X AWD Owner Manual - Page 24
To make a secondary area, CAUTION
View all Husqvarna AUTOMOWER 435X AWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
CAUTION: Do not put the guide wire across the boundary wire, for example a boundary wire that goes to an island. 1.5 m/5 ft 1.5 m/5 ft 0 cm/0" Some obstacles can withstand a collision, for example, trees or bushes taller than 15 cm / 6 in. The product will collide and then turn around with this type of obstacle. However, obstacles that slope slightly, for example stones or large trees with raised roots, must be isolated or removed. The product can run onto this kind of obstacle causing the blades to be damaged. Use the boundary wire to isolate areas inside the work area by creating islands. When the boundary wires to and from the island are put close together, the product can run over the wire. Note: To achieve careful and silent operation, it is recommended to isolate all fixed objects in the work area. • Put the boundary wire to and around the obstacle to make an island. • Put the 2 sections of boundary wire that run to and from the obstacle close together without crossing. • Put the 2 sections of boundary wire in the same stake. • Make sure that there is a minimum of 1.5 m / 5 ft of empty space before an obstacle. 3.4.3.4 To make a secondary area Make a secondary area (B) if the work area has 2 areas that are not connected with a passage. The work area with the charging station is the main area (A). Note: The product must be manually moved between the main area and the secondary area. B A • Put the boundary wire around the secondary area (B) to make an island. Refer to To make an island on page 23. Note: The boundary wire must be put as 1 loop around all of the work area (A + B). Note: When the product cuts grass in the secondary area, the Secondary area mode must be selected. Refer to Secondary area (2nd area) on page 37. 24 - Installation 1404 - 002 -